Assembling the mBot

 We took apart the mBots into all the pieces that make it. We are doing this to understand how to fix it if it goes wrong while we are using it.

These are all the parts of the mBot.

We then put the mBot back together.

We then needed to test the movement of the mBot to make sure we had put it together properly.

This is the mBot running correctly using this code. If the left and right were wrong when we tested it, we would have had to switch the two power cables around to the motors.

Playing with the Microbits

Learning Intention: To learn how to code with simple blocks and to transfer the code from the Chromebook to the Microbit.

First of all, we coded the microbit to show a flashing heart.

We put two show led blocks inside a forever block. The microbit shows the leds that are lit on the block. They will flash between one block and the other forever as both blocks are inside a forever block.

We then coded the buttons on the microbit to do different actions according to which button has been pressed.

When we use the blocks for coding the buttons, they have a drop down to choose which button. This is called a variable.